Hasselblad Flextight 343 Manuel d'utilisateur télécharger pdf (Page 10)

Setting up the Scanner

Environmental Requirements

Set up the scanner in a location that fulfils the following requirements:

•

Keep the scanner away from sources of heat, such as direct sunlight or

a radiator. Warm temperatures will degrade the quality of your scans -

for best results, work in a cool environment.

•

The scanner must be operated away from sources of strong

electromagnetic interference. Although the scanner complies with all

regulations governing electromagnetic immunity and Hasselblad has

taken every reasonable step to make the unit immune to

electromagnetic interference, it is still a precision electronic device so

strong radio waves can interfere with your scans.

•

The surface on which the scanner is placed must be stable and free

from vibrations. If the scanner is shaken or moved while scanning,

your results may be affected.

•

If the scanner has been in a colder environment (e.g. outside or in

storage) just before you set it up in a warmer room, then wait about

two hours before using it - otherwise, condensation may form, which

will prevent the scanner from operating correctly.

• Avoid using the scanner in areas where there is a high level of dust.

•

To prevent dust from getting into the scanner, always close the feed

table when the scanner is not in use.

Electrical Requirements

The Flextight 343 power supply requires a mains voltage of between 100

and 240 V AC at a frequency of 50 to 60 Hz. This is within the normal

wall-socket power standards of most countries. Do not attempt to use

Flextight 343 with any power source outside the specified range.

The scanner and all devices attached to the scanner (computer, monitor,

and FireWire devices, etc.) must be grounded (i.e. use a three-point

electrical connection).

Note that the power supply may emit a low hissing sound when

plugged in but not connected to the scanner. This is normal and will not

damage the power supply or scanner.

User's Guide - Flextight 343

Hardware Reference - Flextight 343

Setting up the Scanner

English

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 21 22

Pas de commentaire

Hasselblad Flextight 343 Manuel d'utilisateur Page 10