Hasselblad Flextight 343 Manuel d'utilisateur télécharger pdf (Page 7)

Front Panel

A Feed Table: place original holders here for scanning. The table can

be folded up to keep dust from entering the scanner and to keep it

out of the way.

B Light Area: for viewing originals. The grid helps you to align the

originals.

C Indicator light: The indicator can light up in 3 different colors

indicating the following:

Green (Power/Ready) - remains lit when ready to scan. Flashes

when first installed to indicate that firmware must be loaded (it will

be loaded automatically when you run FlexColor).

Yellow (Motor Drive) - when drum is repositioning.

Red (Scanning) - when scanning. Do not touch the scanner while

the indicator is red. If the light is flashing when not scanning, then

an error has occurred - please contact your Flextight dealer for

assistance.

D Power Switch: press to turn the unit on/off.

E Original Holder Clasp: all original holders slide into a slot here and

are held in place by magnets.

User's Guide - Flextight 343

Hardware Reference - Flextight 343

Front Panel

English

Figure 1: Front panel features of Flextight 343

1 2 3 4 5 6 7 8 9 10 11 12 ... 21 22

Pas de commentaire

Hasselblad Flextight 343 Manuel d'utilisateur Page 7