Hasselblad H2F Manuel d'utilisateur télécharger pdf (Page 53)

Note the dierence in operation between Single and Continuous drive settings:

• In Single you must press the shutter release button separately for every separate

exposure until the sequence is nished.

• In Continuous you can either maintain the pressure on the button to take all frames

without stopping or you can release the pressure on the button and press again to con-

tinue to the end of the sequence without losing any frames within the set sequence.

2 Bracketing

e bracketing facility provides an automatic series of exposures; one at the standard

exposure setting (Manual or Auto) and the others with pre-determined deviations in

EV from the standard exposure. is is particularly useful for images containing a very

wide tonal range, for example.

Firstly you make an assessment concerning the number of extra frames required, the

order in which they should be taken, and by how much EV deviations there should be

and the setting made accordingly. e rst metered exposure (Manual or Auto) is the

EV that determines the calculations for the bracketing sequence.

options available

2 frames

3 frames

5 frames

7 frames

9 frames

1/3 EV

1/2 EV

1 EV

Bracketing

1 2 ... 48 49 50 51 52 53 54 55 56 57 58 ... 85 86

Pas de commentaire

Hasselblad H2F Manuel d'utilisateur Page 53