Hasselblad H2F Manuel d'utilisateur télécharger pdf (Page 10)

Typical camera grip display when changing settings.

Typical camera grip display. (The information in brackets describes this particular example).

Flash condition indication

(No exposure compensation,

normal ash synchronisation)

Focus setting

(Autofocus setting, single

shot mode)

Aperture setting

(f/5.6)

Exposure mode indication

(Aperture priority setting)

Exposure Value display

(EV 9.3)

Drive condition

(Single setting)

Shutter speed setting

(1/20s)

Film speed rating

(160 ISO/ASA)

Low battery symbol

Film magazine information

(10 frames)

Metering method indication

(Average)

Grip LCD

Setting information

The lower row on the screen displays information about the cur-

rent state of the setting. In short, the upper row displays what you

can do, and the lower row displays the current state of settings or

what you have done.

Control wheel description and direction

Arrowheads symbolize which control wheel should be used to

change the setting they are beside. In this case, the Bracketing

option is chosen by the front control wheel and the number of

exposures in that option is chosen by the rear control wheel.

. . .

= front control wheel

= rear control wheel

Settings symbols

Symbolize the options available when settings are changed. The

active symbol is depicted by a drop shadow.

Command indication

The upper row on the screens describes commands (which

change according to the setting). The button immediately above

each command eects the change. So in this case, for example,

you would press the FLASH button to ‘exit’ from the screen. See

note below.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Hasselblad H2F Manuel d'utilisateur Page 10

Commentaires sur ces manuels