Hasselblad 848 Manuel d'utilisateur télécharger pdf (Page 31)

Preparing the Feeder for

Storage or Shipping

Storing the Feeder

To store the Feeder while it is not in use:

Detach the Feeder using the soware-guided procedure given “Un-

mounting the Batch Feeder” on page 12.

Retrieve the box in which your Feeder was originally delivered. is

box is made of sturdy cardboard and includes a foam lining custom

cut to hold the Feeder safely and securely.

Lay the box down on the oor or on a table.

Open the box, remove the top slab of foam and set it aside.

Align the Feeder so that it will t into the cut foam.

Lower the Feeder into the box.

Replace the top slab and close the box.

e Feeder is now prepared for storage

Shipping the Feeder

If you need to ship the feeder, for example to a new studio or back to Has-

selblad for service, then do the following:

Detach the Feeder using the soware-guided procedure given “Un-

mounting the Batch Feeder” on page 12.

Retrieve both the original shipping screws and storage/shipping box

in which your Feeder was originally delivered.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Pas de commentaire

Hasselblad 848 Manuel d'utilisateur Page 31